ATC
- BT 30
- BT 40
ATC - BT 30
BT 30
SPECIFICATION
CONDITIONS | CONTENTS | |
---|---|---|
Tool Shank (nominal size, No.) | MAS 30 | |
Mass of Tool | 3.0kg x 2 | 1.5kg x 2 |
Tool changing time(tool to tool) | 0.70sec | 0.5sec |
Number of input shaft speed ranges | 1714 / min | 1800 / min |
Mass of arm | 2.5kg | |
Radius of arm | 150mm | |
Drawing force of tool | 88.2N (9kgf) | |
Reduction ratio | 1/20 | 1/15 |
Lubricating system | Oils bath, Greasw | |
Lubricating oils and grease | SAE80W(2-Grade) |
ATC - BT 40
BT 40
SPECIFICATION
CONDITIONS | CONTENTS |
---|---|
Tool Shank (nominal size, No.) | MAS 403 - BT40 |
Mass of Tool | 5.0kg x 2 |
Tool changing time(tool to tool) | 1.20sec |
Number of input shaft speed ranges | 1800 / min |
Mass of arm | 5kg |
Radius of arm | 220mm |
Reduction ratio | 1/40 |
Lubricating system | Oils bath |
Lubricating oils and grease | ISOVG68 (2-Grade) |